Orientation in Nematic Liquid Crystals Doped with Orange Dyes and Effect of Carbon Nanoparticles

Some properties of nematic liquid crystal E7 doped with two disperse orange dyes used together and effect of addition of carbon nanoparticles (single walled carbon nanotube or fullerene C₆₀) on them were studied. Two dyes (disperse orange 11 and 13) having high solubility and order parameter were used as co-dopants. A notable increase in order pa-rameter was obtained comparing to that of liquid crystal doped with single dye. When carbon nanoparticles were used as dopant, a decrease in order parameter was observed at low temperatures while it increased at high temperatures. When applied voltage changed, the order parameter abruptly increased in its threshold value and saturated in higher voltages as expected. An appreciable change in textures was not observed with addition of dopants. This addition gave rise to an increase in nematic-isotropic phase transition temperatures compared with that of pure liquid crystal.     

Cu2O/CNTs复合材料的制备及其光催化性能

以乙二醇为还原剂,采用溶剂热法在混酸(V_(H_2SO_4)/V_(HNO_3)=3∶1)超声处理的碳纳米管(CNTs)表面负载氧化亚铜(Cu_2O),通过改变CNTs的含量制备出球形Cu_2O/CNTs复合材料。采用X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、扫描电镜(SEM)、能谱分析(EDS)、N_2吸附-脱附、紫外-可见光漫反射(DRS)、有机总碳量(TOC)等对Cu_2O/CNTs进行表征;研究CNTs含量对Cu_2O/CNTs复合材料的结构、形貌、比表面积与孔径、光吸收特性的影响;结合光催化机理讨论CNTs对Cu_2O/CNTs光催化性能的影响。结果表明,当CNTs含量为0.2 g时,Cu_2O/CNTs的光催化性能最佳,在可见光照射60 min后,对甲基橙的降解率达到92.1%。     

Enhancing photocatalytic activity of titanium dioxide through incorporation of MIL‐53(Fe) toward degradation of organic dye

Photocatalytic activity of titanium(IV) oxide (TiO₂) can be enhanced through modification of its surface‐active sites. Here, iron(III) carboxylate [MIL‐53[Fe]]‐incorporated TiO₂ (as MIL‐53(Fe)/TiO₂) was prepared using a hydrothermal method. This material was then calcined at 500°C to obtain a MIL‐53(Fe)‐derived γ‐Fe₂O₃/TiO₂ photocatalyst. A photocatalytic study of MIL‐53(Fe)/TiO₂ and MIL‐53(Fe)‐derived γ‐Fe₂O₃/TiO₂ toward cationic methylene blue (MB) and anionic methyl orange (MO) showed that MIL‐53(Fe)/TiO₂ (0.25 wt%) and MIL‐53(Fe)‐derived γ‐Fe₂O₃/TiO₂ (0.75 wt%) resulted the best degree of dye degradation. The MIL‐53(Fe)‐derived γ‐Fe₂O₃/TiO₂ (0.75 wt%) composite for instance is capable of degrading almost 100% of 20‐ppm MB and MO, respectively, within 6 hr. Photocatalytic degradation of MB and MO was well fitted to the Langmuir‐Hinshelwood pseudo‐first order kinetics model, which indicates physisorption as the key partway that facilitates dye decomposition on the surface of a photocatalyst under UV‐A irradiation. This study provides new insights into the exploration of MILs/TiO₂ materials for the environmental remediation and pollution control.     

Carbon nanotubes/TiO2 nanotubes composite photocatalysts for efficient degradation of methyl orange dye

A series of carbon nanotubes/TiO2 nanotubes （CNTs/TNTs） composite photocatalysts were successfully prepared by incorporation of CNTs in HNO3 washing process. These photocatalysts were characterized by XRD, N2 physical adsorption, UV-vis diffuse reflectance spectroscopy, TEM and Raman spectroscopy, respectively, and their photocatalytic activities were tested by using methyl orange （MO） as a model compound. Also, the effects of amount of CNTs incorporated, calcination temperature and amount of catalyst on the photocatalytic activity of the composite photocatalyst were systematically investigated. The results show that the CNTs/TNTs composite exhibits much higher photocatalytic activity than that of the TNTs or CNTs alone.     

橙汁中苯甲酸含量测定的国际比对APMP.QM-P23

建立了橙汁中苯甲酸含量的高效液相色谱-紫外检测（HPLC-UV）和液相色谱-同位素稀释质谱法（LC-IDMS）两种准确测定方法,应用于亚太计量规划组织（Asia Pacific Metrology Programme,APMP）开展的橙汁中苯甲酸含量测定的国际比对（APMP.QM-P23）,取得了满意的结果,对我国在相关领域的国际计量等效互认提供了有力的支持。本研究着重考察了色谱分离条件和样品预处理条件对测定结果的影响,对两种方法测定比对样品结果的不确定度进行了详细分析研究。HPLC-UV方法的检出限（信噪比大于3）为0.75 mg/kg,在100 mg/kg添加水平下,橙汁中苯甲酸的平均回收率为99.4%;LC-IDMS方法的检出限为0.05 mg/kg,在相同浓度添加水平下,苯甲酸的平均回收率为99.6%。采用两种方法同时对样品进行测定,比对报出结果苯甲酸含量为（102.0±2.1）mg/kg（包含因子k=2）。两种方法均简单、准确、可靠,且具有较好的重现性,LC-IDMS方法由于灵敏度高更适合于橙汁中微量苯甲酸的测定。     

表面增强拉曼光谱法快速检测脐橙果肉中三唑磷农药残留

采用表面增强拉曼光谱技术结合快速溶剂前处理方法检测脐橙果肉中三唑磷农药残留,应用化学计量学方法建立脐橙果肉中三唑磷农药残留的快速检测模型。以脐橙果肉提取液为基质,采用N-丙基乙二胺、C18和石墨化碳去除果肉中有机酸、色素等荧光物质,配制不同浓度的三唑磷农药溶液,应用不同预处理方法对光谱信号进行预处理,建立偏最小二乘模型。结果表明,以脐橙果肉提取液为基质的三唑磷溶液最低检测浓度低于0.5mg·L-1;归一化预处理后建立的模型预测性能最好,模型对预测集样本的均方根误差为1.38 mg·L-1,相关系数为0.976 6,相对分析误差为(RPD)4.66。预测回收率为95.97%～103.18%,相对误差绝对值在5%以下,表明模型具有较好的预测效果。对4个未知浓度样本进行配对t检验,预测值与真实值无显著差异,说明所建立的方法准确可靠。     

高分子模板对CdS量子点制备及其光催化性能的影响

分别以球形聚酰胺-胺(PAMAM)树形分子和线形聚乙烯吡咯烷酮(PVP)两种结构不同的高分子为模板, 原位制备了分散良好的CdS量子点(CdS QDs), 并以甲基橙为降解对象, 研究了高分子模板结构对CdS量子点的制备和光催化性能的影响. 结果表明, 以PAMAM 树形分子为模板制备的CdS量子点(CdS QDs/PAMAM)比以PVP为模板制备的CdS量子点(CdS QDs/PVP)的尺寸分布更窄, 激子吸收峰更明显, 光致发光(PL)强度更高|并且在量子点尺寸接近的情况下, CdS QDs/PAMAM的催化效率明显高于CdS QDs/PVP. 这是由于PAMAM树形分子独特的结构有利于生成尺寸均匀的CdS量子点, 且不易钝化量子点表面的活性位点|而线性的PVP分子量分布较宽, 使制备的量子点的尺寸分布较宽, 且PVP分子链缠绕在CdS量子点表面, 钝化了部分活性位点, 降低催化效率. 此外, CdS QDs/PAMAM的催化能力随粒径减小而增大.     

杂多酸/聚乙烯醇复合膜的制备及光催化性能研究

合成了过渡金属取代的硅钨酸盐K₆SiM(H₂O)W₁₁O₃₉(M=Co、Ni、Cu,简称为SiMW₁₁),利用硅钨酸(H₄SiW₁₂O₄₀·nH₂O,简称为SiW₁₂)与SiMW₁₁做母体,分别将它们负载于聚乙烯醇(polyvinyl alcohol,PVA)上,制成一系列杂多酸/聚乙烯醇复合膜光催化剂,利用IR、SEM进行了表征.以高压汞灯为光源,分别研究了SiW₁₂/PVA、SiCoW11/PVA、SiNiW₁₁/PVA、SiCuW₁₁/PVA复合膜对有机染料甲基橙的光催化脱色,它们都具有很高的催化活性,60 min内对甲基橙的脱色率均可达到90%以上,其中SiW₁₂/PVA复合膜效果最好,12 min内脱色率达100%.提高SiW₁₂负载量可有效提高膜的光催化活性,当SiW₁₂与PVA质量比为1:1时催化活性最高.     

表面活性物质对SiO2干凝胶中甲基橙变色反应的影响

掺杂;表面活性物质对SiO2干凝胶中甲基橙变色反应的影响     

卤素离子对联有吖啶基三元共聚物薄膜的荧光猝灭

在合成了几种带不同组成比吖啶基三元共聚物的基础上,对其溶液和薄膜的吸收与荧光发光光谱进行了表征.研究了上述薄膜在含有卤素阴离子溶液中的荧光猝灭问题,发现含有不同吖啶组成比的薄膜对不同卤素离子具有不同的选择性,过多或过少吖啶含量的薄膜均对选择性的识别卤素阴离子不利,只有在某种特定组成条件下方能得到最佳、具有特征识别阴离子能力的薄膜器件.对所得结果进行了详细的讨论.